Published installation relationships. Exact supplied profile, kit and current instructions must be reconciled.
WD-DK-FIELD-001 / Fastening
Pregrooved deck field fastening
Where does the hidden connection engage the board?
Preparing interactive views…
Architectural contextFinished images locate a hypothetical condition. Diagrams show relationships, not approved geometry. Keep project dimensions, fastening and water-management details with the current technical submittal.
Read the relationship
The shared edge between two field boards
The field condition repeats at designed supports. It does not resolve the first board, last board, butt joints or perimeter. Keep the fastener system and the supplied machining separate until their fit is documented.
Profile and interface
Eased-edge board with two system-specific grooves. Groove cut, depth, location and tolerance require the approved production drawing.
Before this becomes buildable
Apply this guide / Your review notes
Required project evidence
Mark the questions you have reviewed. A checked item records your progress; it does not certify the work.
0/4
Review items considered
This checklist is temporary. Print the page to retain the marked review with the guide.
Checking a review item records your review; it does not change the verification state of this library.
Add the junction to your interface schedule ↗Manufacturer reference / reviewed September 26, 2026
Read the groove before checking the connection
DeckWise’s Ipe Clip reference separates four measurements. Select a measurement to locate it in this schematic edge fragment.
A · Groove cut
5/32 inchThe opening through the edge. This is not the installed space between boards.
Reference geometry, not supplied-profile approval. Not to scale. The broken edge omits board width. Eased outer edges are schematic; no radius or tolerance is established here.
Check the actual machining drawing against the exact clip model. These values do not establish installed gap, screw path, substrate suitability or a fastening schedule.
Read the manufacturer’s Deck Groove Profile reference ↗Evidence / Revision 2026-09-16
What supports this study?
Source relationships and supplied-product approval are separate. This study has no verified fabrication geometry.
Resolve the exact supplied profile and production drawing. Unresolved cuts remain unresolved.
Resolve the complete material, profile, substrate and exposure combination.